To download files you need to register

Keyfrost Environmental Sensitivity
European regulation 517/2014 establishes the rules relating to the marketing of HFC-containing equipment and products. One-piece refrigerant machines fall under item 12 and may use refrigerant gases with GWP less than 2500. Keyfrost produces ranges of monoblocks that use different refrigerants including R449A, R290, R455A etc.
Given the increasingly stringent regulations and the technological availability, Keyfrost wanted to develop and support, above all, the expansion of the monoblock range using R455A refrigerant. Where possible it is therefore recommended to use monoblocks at R455A and/or R290. R455A machines have a 90% lower environmental impact, due to the refrigerant charge, in terms of CO2eq.

Use of ultra-low GWP refrigerants
The new range of Keyfrost monoblocks includes the use of natural refrigerants at very low GWP. With a GWP of only 3, the R290 stands as a solution for the future of small-scale commercial refrigeration for low and medium temperatures.
Our tests have also demonstrated a significant advantage in terms of TEWI which depends on the GWP but also on all the design solutions adopted.
Minor limit charge of 150g:
R290 is classified A3 meaning it is not toxic but is highly
flammable. Depending on the application and the available volume, it is possible to calculate a maximum refrigerant charge that makes the machine safe from any accidents related to the flammability of the fluid.
Below 150g refrigerant charge there are application limits as 150g is never sufficient to create a potentially hazardous atmosphere.
The Keyfrost R290 monoblocks are all loaded with 150g
or not with a refrigeration circuit.

Destinations of use, intended and unintended use
Keyfrost refrigeration equipment is agri-food machinery (MACHINE DIRECTIVE 2006/42/EC), intended for treatment
of food products.
The machine is intended for the preservation of “fresh“ foodstuffs and/or products at the temperatures indicated in the annexes.
It was designed to be able to work at room temperature from +16°C to +43°C (class T).
It was designed to maintain a certain temperature in a cold room designed for such use.
The machine is not intended to be installed and used in cells located outside.
The machine is not intended to be installed and used in an atmosphere at risk of explosion.
Any use outside the permitted ones is considered “improper use“ and therefore the manufacturer disclaims any responsibility for it.
The unit is not intended to be used for the storage of products that develop corrosive substances.

• hermetic compressors
• air or water condensation
• thermostatic valve or capillary tube coolant expansion
• evaporation of defrost water via evaporation basin with anti-corrosion hot gas pipe
• control of the refrigeration system via electronic control unit
• light cell lighting
• door resistance connection cable (BT versions)
• fixed calibration high pressure switch and manual reset (on models: see attachments)
• low pressure switch (on models: see attachments)
• On/Off condensation control via calibratable probes
• provision for microport
• exterior body made of galvanized steel sheet, epoxy powder painted at 200°C
• interior body in satin magnesium aluminum
• manual cell light switch
• manual switch on/off system
• electric motors protected by thermistors
• connection port to MODBUS systems for management control and HACCP

KBF R455A NE 50Hz

Model Power supply Capacity Watt Volume A
m³		 Volume B
m³		 Technical sheet
(Register for download)
KBF 09NE 230/1/50 1137 9,0 7,5
Download
KBF 11NE 230/1/50 1323 11,0 9,0
Download
KBF 13NE 230/1/50 1562 11,0 9,5
Download
KBF 18NE 230/1/50 1701 18,5 15,5
Download
KBF 21NE 230/1/50 2089 21,0 17,0
Download
KBF 24NE 230/1/50 2635 26,5 21,0
Download
KBF 28NE 230/1/50 3663 33,0 26,5
Download
KBF 28NE 400/3/50 3716 33,5 26,5
Download
KBF 32NE 230/1/50 3663 39, 5 31,5
Download
KBF 32NE 400/3/50 3716 39,0 31,0
Download
KBF 35NE 230/1/50 3962 41,5 33,0
Download
KBF 35NE 400/3/50 3625 40,0 32,0
Download
KBF 37NE(T) 400/3/50 4405 47,0 37,0
Download
KBF 49NE(T) 400/3/50 4405 66,0 52,0
Download

CAPACITY
Te=-10°C;Tcond=+40°C

VOLUME
Vol. A = Cell insulation: All surfaces
Vol. B = Cell insulation: All walls except floor (volume calculation conditions)
Cell Temperature= 0 °C
Environment Temperature= 32°C

KBF R455A BE 50Hz

Model Power supply Capacity Watt Volume A
m³		 Volume B
m³		 Technical sheet
(Register for download)
KBF 07BE 230/1/50 761 6,0 –
Download
KBF 09BE 230/1/50 1298 8,0 –
Download
KBF 14BE 230/1/50 1442 15,0 –
Download
KBF 14BE 400/3/50 1458 15,0 –
Download
KBF 18BE 230/1/50 2151 24,0 –
Download
KBF 18BE 400/3/50 2101 23,0 –
Download
KBF 23BE(T) 400/3/50 2203 34,5 –
Download

CAPACITY
Te=-30°C;Tcond=+40°C

VOLUME
Vol. A = Cell insulation: All surfaces
Vol. B = Cell insulation: All walls except floor (volume calculation conditions)
Cell Temperature= -20 °C
Environment Temperature = 32°C

KBF R455A NE-W 50Hz

Model Power supply Capacity Watt Volume A
m³		 Volume B
m³		 Technical sheet
(Register for download)
KBF 09NE-W 230/1/50 1137 10,0 8,5
Download
KBF 11NE-W 230/1/50 1323 13,0 11,0
Download
KBF 13NE-W 230/1/50 1562 15,0 12,0
Download
KBF 18NE-W 230/1/50 1701 20,0 16,0
Download
KBF 21NE-W 230/1/50 2089 23,5 19,0
Download
KBF 24NE-W 230/1/50 2635 29,5 23,5
Download
KBF 28NE-W 230/1/50 3663 36,5 29,0
Download
KBF 28NE-W 400/3/50 3716 37,0 29,5
Download
KBF 32NE-W 230/1/50 3663 44,0 35,0
Download
KBF 32NE-W 400/3/50 3716 44,0 35,0
Download
KBF 35NE-W 230/1/50 3962 49,0 39,0
Download
KBF 35NE-W 400/3/50 3625 46,5 36,5
Download
KBF 37NE-W(T) 400/3/50 4405 51,5 41,0
Download
KBF 49NE-W(T) 400/3/50 4405 69,5 54,5
Download

CAPACITY
Te=-10°C;Tcond=+40°C

VOLUME
Vol. A = Cell insulation: All surfaces
Vol. B = Cell insulation: All walls except floor (volume calculation conditions)
Cell Temperature= 0 °C
Environment Temperature= 32°C

KBF R455A BE-W 50Hz

Model Power supply Capacity Watt Volume A
m³		 Volume B
m³		 Technical sheet
(Register for download)
KBF 07BE-W 230/1/50 761 7,0 –
Download
KBF 09BE-W 230/1/50 1298 10,0 –
Download
KBF 14BE-W 230/1/50 1442 17,0 –
Download
KBF 14BE-W 400/3/50 1458 17,0 –
Download
KBF 18BE-W 230/1/50 2151 27,0 –
Download
KBF 18BE-W 400/3/50 2101 26,5 –
Download
KBF 23BE-W(T) 400/3/50 2203 37,5 –
Download

CAPACITY
Te=-30°C;Tcond=+40°C

VOLUME
Vol. A = Cell insulation: All surfaces
Vol. B = Cell insulation: All walls except floor (volume calculation conditions)
Cell Temperature= -20 °C
Environment Temperature= 32°C